How do you groom your nails? Attracting and cleaning nails bring a more elevated look to your body. How do you like your nail done? Sometimes you want them short and sometimes you professional that needs a Nail Clipper. But are you proficient enough to use it? You may have been wondering how to use a nail clipper.
This article will teach you how to hold your nail clipper correctly and guide you to use your nail cutter set. We will also explain the differences between different types of nail clippers, including the diagonal one.
Steps to Use a Nail Clipper
To use your nail clipper properly, which brings more satisfying results, you must follow these steps. The steps include:
- Take a good clipper and always soften before clipping.
- Hold it with your right hand, the lever of the clipper resting against your index finger.
- You should also hold the plier-style handle in your palm and wrap your fingers to prevent it from slipping.
- Next, you should position the cutting blades of the clipper around your nail.
- Make sure not to place them too close to the quick, the part of the nail where your skin meets your nail.
- Don’t touch your cuticles.
- Now wash and give proper conditioning to your nails by applying creams and moisturizers.
Tip: Always cut straight; that will help you avoid ingrown nails – leading to infection later.
How to use a Nail Cutter?
To give your nails a professional-looking shape, you need to know how to use nail cutters. They’re essential tools in pedicures and manicures and can be a great help when it comes to getting a nice manicure.
Nails are also notoriously dirty, so trimming them is essential for your overall health. And if you have a pedicure jar, here are some tips on how to use a nail cutter:
To begin, you need to clean your nails. Using a Nail File to remove any dirt and grab your nail cutter is better. Cut the nails smoothly, and make sure you’re cutting both sides equally. Start with your middle finger, and cut the first side of the nail symmetrically.
Continue this process for each finger. You can cut longer nails with a longer length than short nails. To get a neat Oval shape, cut a smaller portion on each side of the middle finger.
How to use the nail cutter set?
A nail clipper and cutter sets include both a file and a clipper. When cutting your nails, you must follow the proper steps and not cut too hard, resulting in uneven nails and uncomfortable ingrown nails.
Always buy separate sets for toes and fingers. Also, keep in mind that you should clip toenails straight while clipping fingers. A nail clipper should have a strong blade.
Choose nail clipper sets with steel blades or titanium or stainless steel. Choosing the right one for your nails is essential, as a cheap one may not do the job correctly. The blades of the nail clipper should never overlap and should be double-clicked when compressed.
You never use nail clippers that have an over or under-bite. It is also important to remember that nail nippers are not like those you can buy at the hardware store. They are shaped with concave and straight blades and a hairline gap.
Also Read: How to Use a Clipper
How to use a Diagonal Nail Clipper?
There are many ways to cut nails, and a diagonal nail clipper can help you do just that. It can be tricky to get the exact shape and size you want, but you can quickly achieve the perfect look every time with some simple tips.
We are providing you with tips for choosing the best diagonal nail clipper. It is also helpful to know what you can buy at various stores to save money. And don’t forget to look for discounts and coupon codes as well.
An excellent diagonal nail clipper will have sharp blades. Its design helps you get a clean cut without any nicks or cuts. And since it’s made from stainless steel or titanium, the edges will stay sharper.
And, because you can easily cut the corners of your nail, you can even remove ingrown nails. The diagonal nail clipper can even help you cut away dead skin around the sides of your nails.
Also Read: Are Foil or Rotary Shavers Better
Types of Nail Clippers
Many nail clippers and choosing the correct type depending on your personal needs. There are clippers for regular nails, ones for overgrown nails, and ones for professional use.
These tools may require different maintenance, such as regular oiling and sharpening.
People with mobility issues or difficulty handling small objects may need different clippers. Regardless of your needs, it is essential to keep your nails clean and healthy.
Nail clippers should be sharp and durable. You can buy aluminum or plastic clippers for baby nails, but you should be careful about the materials you choose for your toenails. Stainless steel clippers are better for older people, as they’ll last longer and remain sharp.
However, these tools are more expensive than regular clippers. Choose your clipper according to the size of your nails, as this can make your nails look untidy.
The compound lever style is the most common among the many nail clippers. This clipper uses a lever system to cut the nail with a sharp blade. It works well on fingernails but can be challenging to use for toenails.
Nonetheless, if you’re looking for an easy-to-use clipper, you can look for the Safety 1st Sleepy Baby Nail Clipper. It features long levers and straight edges for a safe, clean-cut.
How to open nail clippers?
If you have lost or misplaced your nail clippers, you may be wondering how to open them again. Thankfully, it is easier than you think. These tools may even come with extra features like a nail file. Unfortunately, these aren’t very good for routine use. Instead, use an emery board to gently file away at the nail, making them perfect for home use.
Nail clippers typically have two blades held together by a pin. The third piece is meant to rotate and use a clipper, grasp the bottom part on your fingers and rotate the lever. Once you have cut your nail, rotate the handle 180 degrees.
Remember to dry your hand after each use, especially the blade. If possible, sterilize your clippers with rubbing alcohol. However, be careful to follow the manufacturer’s instructions.
Nail Cutter Function and Uses
The present invention provides a nail clipper with a lever, comprising a receptacle for a fragmented fingernail. The lever closes the cutting edges, clipping the nail portion between these elements.
The lever may include an inner and outer end panel. The cutting edges of the clipper are substantially coextensive. As a result, they can cut a fingernail in two parts: the first and second cutting elements.
The clipper has many valuable features. Some have a nail file built into the tool. Nonetheless, these features are not enough for everyday use. If the clipper’s nail file can’t cut the nail evenly, it’s better to use a separate tool such as an emery board.
You may also use the nail file included in the package to remove unevenness or bumps. To avoid causing damage to the nail, do not use the clipper with sharp blades.
The nail clipper is operated with a lever or a handle. Once you have selected the nail, you want to remove, press the lever or handle until the head cuts through the nail.
If you have a hangnail, avoid biting your nails, as it will start to peel layers of keratin from the nail and weaken the edge of the nail. It can even break. The best way to avoid this is to file your nails as short as possible.
How to use an Acrylic Nail Cutter?
If you’ve been wondering how to use an acrylic nail cutter, here are some tips to make the procedure a breeze. First, remember to start from the side of the nail and cut into the middle, not the entire length.
It will keep the acrylic nail looking consistent and professional. If you’ve cut it too short, it will be uneven and need filing. It’s best to fabricate the acrylic with soft strokes to ensure smooth edges.
Next, use a nail file with a grit of 240-280. It will ensure that the edges of the acrylic nail are even, and the overall shape will be neat and professional. Once the nail has been filed, you’ll be ready to apply a layer of nail polish and choose your shape. The most common shapes are square, oval, and almond, while the stiletto shape is very on-trend.
How to use toenail clippers for thick nail?
A quality pair of toenail clippers will allow you to cut thick nails without splitting them and require little pressure to use. Unlike the clippers available in drugstores, these tools will last for years and are easy to use.
There are different types of toenail clippers, from levers to nippers. Generally, the nipper-style clippers are the best choice for thick nails. Unlike levers, nipper clippers are easy to use, safe, and prevent ingrown toenails.
The Clippro Toenail Clipper is the best consumer nail clipper for thick nails. Its jaw opens over a full inch, resulting in a clean and smooth cut. If your nails are very thick, you should use a professional-grade clipper. Never use fingernail clippers to thin your nails. Instead, purchase clippers explicitly made for thick nails.
Final Words
We have provided you with the complete details on How to use a Nail Clipper for a professional nail look, along with using a nail cutter and its functions. Moreover, there is a guide to using the toenail clipper for thick nails. Just follow this step-by-step guide and have healthy nails.