How to Clean Electric Razor | Disinfecting Razor from Microbes

As an expert in personal grooming, I know that maintaining your electric razor is essential for ensuring optimal performance and prolonging its lifespan. Regular cleaning of your electric razor can help remove any buildup of hairs, dirt, and bacteria that can affect its efficiency and cause skin irritation. So, How to Clean Electric Razor?

By following the proper cleaning steps and tips, you can help keep your electric razor in top condition and avoid any potential problems that may arise from using a dirty razor. Whether you have a foil or rotary electric razor, cleaning it is straightforward. You can quickly and easily clean your electric razor with a few basic tools and common household items.

In this guide, I’ll outline the steps and tips for cleaning your electric razor and provide some general advice on how to maintain your razor to ensure it performs at its best.

What is the importance of cleaning electric razors?

Rinsing the electric shaver with warm Water will remove Water, dirt, and grime that can clog the razor blades and make them useless. To remove Water and other residues, lay the blades on a dry towel and let them air dry.

Skin Irritation and Allergies 

If you are using an electric shaver for shaving, cleaning it after every use is essential. Suppose your electric razor is dirty. It can cause irritation and allergies.

Skin Irritation and Allergies



If you do not adequately care for your electric razor, it can cause infection. In addition, it may lead to other severe skin diseases.

It’s essential to clean your electric razor after each use to prevent such problems. For the best results, you should always wash the blade with warm water and allow it to dry. Then, rinse it again.

Steps to follow  for cleaning men’s electric razor 

Electric razors have several parts. Most razors can be taken apart and cleaned. 

Cleaning your electric razor regularly can help prolong its lifespan and maintain its performance. Here are the steps and tips to follow for cleaning your electric razor:

    1. Turn off and unplug your electric razor to avoid any accidents.
    2. Remove the foil or rotary head of the razor, depending on your razor type. Refer to the user manual if you’re unsure how to do this.
    3. Shake off any loose hairs or debris from the razor head.
    4. Rinse the razor head under running water to remove any remaining hairs and debris. Make sure to use warm water as it will help to soften and remove any stuck-on debris.
    5. Apply a small amount of liquid soap or shaving cream to the razor head, and then use a soft-bristled brush (like an old toothbrush) to gently scrub the head and remove any stubborn dirt or debris. Be gentle while doing this, as too much pressure can damage the razor head.
    6. Rinse the razor head thoroughly under running water to remove any soap or shaving cream residue.
    7. Shake off any excess water from the razor head and let it air dry completely before reattaching it to the razor.
    8. If your electric razor has a cleaning station, follow the manufacturer’s instructions on how to use it properly. Some electric razors come with self-cleaning options that use special cleaning fluids.

Tips to Clean

  • Always refer to the manufacturer’s instructions for cleaning your electric razor; some razors have specific cleaning requirements.
  • Clean your electric razor after every use or at least once a week if you use it frequently.
  • Do not use abrasive cleaners or materials such as steel wool, as they can damage the razor head.
  • If your electric razor has a rechargeable battery, ensure it’s fully charged before using it again.
  • Replace the razor head or blades as recommended by the manufacturer to ensure optimal performance.

How to Deep Clean Electric Razor?

If you are concerned about How to clean electric hair razors in a more sophisticated and comprehensive way, then you can try a different method.

Using a Brush 

Using a brush is an essential step in cleaning your electric shaver. It removes dead skin and hair from the blade, making the shave more efficient. Some blades are also cleaned with Water. 

Rinse it With Water 

After dry-brushing, rinse the razor with Water to clean it initially so that the dirt and residue leave the blade.

Use a Soap or Any Cleansing Liquid 

You need to scrub it thoroughly with soap. It will kill bacteria and keep the shaver working in tip-top condition. You may choose an electric razor cleaning solution from the different cleansing liquids and spray from the market. 

✔ Tip: Wash the razor’s removable parts with hot Water.

How to clean the head of an electric shaver?

The most often and essential question is how to clean an electric shaver head. A clean electric razor is undoubtedly one of the essential parts of the device. These are the steps you can follow to get the desired clean electric razor or shave:

Disassemble the Head

Keeping the shaver by the side, separate the head from the razor to clean. 

Clean the Head with Brush 

After separating it from the razor, take a brush and clean the residue and dirt from the head thoroughly.

Wash It With Water


Wash It With Water

Take it under the Water and rinse thoroughly to remove most dirt and residue. And it is better to use hot Water to get the most desired and expected result.

Use the Professional Cleansing Spray/Solution

As it is the most imperative part of the razor, you must use the disinfectant spray or solution to get them a clean and germ-free electric razor head.

Clean it, Cloth it, and Dry it. 

The next step is to clean it with a dry cloth and leave it in a dry place to parch and dry to avoid any electrical issues altogether.

Reassemble the Head

You may reassemble it carefully, and then you are good to go.

How to Clean Electric Shaving Razor?

It would be best to keep these things in mind to get the most satisfying results while cleaning and maintaining the electric razor.

  • Usually, your electric shaver comes apart into pieces. While some razors are one-piece, you can still clean the blades with a brush if necessary.
  • Before you use a battery-powered shaver, remove the batteries.
  • Know about shaver waterproofing quality.
  • Separate the head of the razor.
  • Afterward, take the blades apart and scrub them with soap. 
  • Then, rinse the parts of your electric shaver with hot Water.
  • Make them dry thoroughly to avoid any electrical or mechanical hazards.

How to Clean Electric Razor Alcohol?

To disinfect an electric shaver, you should use alcohol. Alcohol is an excellent disinfectant, killing the pesky microbes in the shaver. You should also lubricate the parts of your electric shaver, so they do not dry out too quickly.

The most common type of alcohol to disinfect an electric shaver is isopropyl alcohol, also known as rubbing alcohol. You can also use a disinfecting liquid containing at least 90% alcohol, but be careful as it can dry quickly and may not work correctly. 

✔ Tip: If you have a disposable shaver, remove its batteries and use it with a different cord, which may cause it to lose its sharpness.

Significance of Using Disinfectant Liquid

You can use a sanitizer or disinfectant solution to clean your electric shaver with Water. A disinfectant liquid is often recommended to kill the pesky microbes that can infect your electric shaver. 

It is essential to clean all parts of your razor, including the blade, with a brush to prevent bacteria from growing. You can also take a brush to the blade if it’s disposable.

You may use a cleaning electric shaver with vinegar and a disinfectant liquid to kill the microbes and clean the dirt, residue, and dead skin from the blades.

Maintenance of Electric Razor 

Keeping your electric razor clean is a good idea if you shave frequently. You must disinfect your razor after each use to avoid irritations and infections. An unclean blade will become blunt and cause numerous cuts and irritations.

Regularly cleaning your electric shaver will prevent this from happening. If you use a disposable shaver with disposable blades, you can also use an alcohol-based sanitizer.

Clean it After Every Use.

Electric razors must be cleaned regularly. It makes your shave easy and breezy. It is much more effective than shaving with a traditional electric razor. 

Use Alcoholic Sanitizer

You can use alcohol to clean your electric shaver. Using a cleaner can be substituted for alcohol if it doesn’t work. Then, you can use a disinfectant spray on the parts of the electric shaver to keep them from rusting.

Use Lubrication/ Oiling

Keep it lubricated and oiled occasionally to get a suitable and satisfying experience. Keeping it lubricated and oiled can extend its lifespan.

Keep Examining the Razor

If you are a frequent user, you must check the razor part and functionality to know about any breakage or mishandling nicks and nudges.

Use Spray or Disinfectant Regularly 

You need to keep the proper use of disinfected or cleaning solution regularly to clean the electric razor. It helps make your shaving experience better and keeps your electric razor intact.

Frequently Asked Questions (FAQs)

Should I use my electric razor wet or dry?

It depends on the type of electric razor you have. Some electric razors are designed to be used dry, while others are designed to be used wet. Dry electric razors usually have a foil head and are intended to be used on dry skin. They work best for quick touch-ups and can be used almost anywhere, even when you’re on the go. They’re also less messy than wet electric razors since you don’t need to use any shaving cream or water.

Wet electric razors usually have a rotary head and are designed to be used with shaving cream or gel. They’re best for people with sensitive skin and those who want a closer shave. Wet electric razors are also great for people who want to shave in the shower or bathtub.

Before using your electric razor, always refer to the manufacturer’s instructions to determine whether it’s intended for wet or dry use. If you’re still unsure, check the model number online or contact the manufacturer for more information.

What happens if you use the same dirty electric razor?

If you use the same dirty electric razor without cleaning it, you risk several potential consequences:

  • Poor performance: As hairs, dirt, and debris build up on the razor, it may not cut as effectively and it decreases the life of the razor. You may need to make more passes with the razor to achieve a close shave, which can increase the risk of skin irritation. Wanna know How long an Electric shaver and Razor blades last?
  • Skin irritation: Dirty razor heads can harbor bacteria that can cause skin irritation, redness, and even infection. This is especially true if you have sensitive skin.
  • Dull blades: Hairs and debris can dull the razor blades over time, which can decrease the lifespan of the razor and require more frequent replacement of the blades.
  • Unpleasant odor: Over time, bacteria and other microorganisms can grow on the dirty razor, which can cause an unpleasant odor.


If you have an electric razor and want to keep it clean, disinfect it regularly for a better shaving experience. Cleaning it is a strenuous task, but it can be just a breeze with the clear instructions that we have provided. Your electric razor is essential to men’s grooming; you need to value it and pamper it by cleaning it regularly.

Leave a Comment